VW Touareg repair


- 1. Operation and car maintenance
   + General information
   + Keys and locks of doors, electric steklopodjemnikiya
   + Governing bodies and control devices
   - Management of a microclimate
      Conditioner
      Climate control 2C-Climatronic
   + Seats
   + safety Systems
   + Maintenance and driving
   + Tables
+ 2. Engine
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes



Volkswagen Touareg / Touareg repair>> Operation and car maintenance>> Management of a microclimate>> Climate control 2C-Climatronic

Fig. 1.86 . Governing bodies climate control 2C-Climatronic: 1–a temperature regulator for the left side; 2–a key for inclusion of automatic control of temperature, a step of operation of the fan and distribution of supply of air in salon; 3–the index of the set temperature for the left side of salon in the main Komfort-setup menu it is possible to choose temperature measurement on Celsius or by Fahrenheit; 4–the indication of the chosen step of the fan; 5–keys «+» and «–» for installation of a step of the fan; 6–a key – supply of air up; 7–a key – supply of air in the middle; 8–a key – supply of air down; 9–keys + and – for installation of a step of the fan; 10-the indication of the chosen step of the fan; 11-the index of the set temperature for the right side of salon in the main menu «Кomfort – setup» it is possible to choose temperature measurement on Celsius or by Fahrenheit; 12-the key – cleaning of windshield ice a mode of a retsirkulyatsiya of air is switched off, external air goes on a windshield. at external temperature above 3 °C the refrigeration unit for air drainage turns on. the highest step of the fan automatically joins; 13-a key – manual control by a retsirkulyatsiya mode; 14-a key – automatic control of a retsirkulyatsiya mode; 15-a key – use of residual heat; 16-a key – heating of back glass; 17-a temperature regulator for the right side; 18-a key – switching off of the refrigeration unit


Governing bodies provide separate regulation of a microclimate on the left and right parties of salon (fig. 1.86) .
Climatic installation works at all modes, except a mode of use of residual heat, only at the included ignition. The refrigeration unit operates only at the working engine and the switched-on fan.
For installation of desirable temperature in the left or right half of salon it is necessary to rotate a temperature regulator.
For managements of various functions keys serve. When any function is included, in a key the yellow lamp shines.

Automatic mode
At an automatic operating mode the temperature, giving and distribution of a stream of air are regulated in such a manner that the set temperature in salon is reached during minimum possible time and then supported at the set level.
Temperature for the left and right parties of the car regulate separately.

Inclusion of an automatic mode
Press the AUTO key. In a key the yellow lamp lights up.
For installation of desirable temperature on the left and right parties of salon use rotary regulators of temperature. It is recommended to establish 22 °C (72 °F).
At an automatic mode and the set temperature of 22 °C (72 °F) in salon the comfortable microclimate is quickly created. This installation should be changed only when it is necessary to satisfy someone's special requirements or to create special conditions of a microclimate in salon. The temperature in salon can be established in a range from +16 °C (61 °F) to +29,5 °C (86 °F). Here it is a question of approximate temperature borders which depending on external weather conditions can be displaced slightly above or below.
Climate control maintains the set temperature completely automatically. For this purpose the temperature of air submitted to salon, a step of operation of fans and distribution of supply of air are automatically regulated.
Climate control is capable to react to strong sunlight therefore there is no need for manual correction of work of climatic installation properly. Thus, almost always the automatic mode creates the best conditions for the driver and passengers at all times years.
The automatic mode is switched off, when press one of keys of distribution of air, steps of the fan or the ECON key. Thus regulation of temperature proceeds.

Manual mode
In a manual operating mode the temperature, giving and distribution of air are set by the driver or the passenger.

Inclusion of a manual mode
Press one of keys from 5 to 9 or the ECON key. The yellow lamp in the AUTO key dies away.

Temperature
For the left and right parties of salon various regulators of temperature are provided. The set temperature is shown over the corresponding regulator. The temperature in salon can be established in a range from +16 °C (61 °F) to +29,5 °C (86 °F). Here it is a question of approximate temperature borders which depending on external weather conditions can be displaced slightly above or below.
If set temperature below 16 °C (61 °F), there is «LO» indication. Installation works with the greatest possible hladoproizvoditelnost, the temperature is not regulated.
If set temperature above 29,5 °C (86 °F), there is «HI» indication. Installation works with the greatest possible heatproductivity, the temperature is not regulated.

Fan
One of seven steps of supply of air of the fan establish keys «+» and «–» for each party of salon separately. At a step 0 fans climatic installation is switched off.
Distribution of supply of air.
The corresponding keys regulate distribution of supply of air. It is in addition possible to open or close some nozzles separately.
Turning on/switching off of the refrigeration unit.
In pressing of the ECON key switch off the refrigeration unit for economy of fuel. Regulation of temperature proceeds. The set temperature can be reached

Mode of giving of residual heat of "REST"
At the included mode of heating residual heat uses residual heat of the engine. In this mode installation works in order to avoid the strong category of the accumulator because of a pump drive no more than 30 minutes.
At the included mode of giving of residual heat probably automatic or manual control.
At the switched-off ignition the capacity of the fan goes down for economy of the electric power.

Retsirkulyatsiya mode
The mode of a retsirkulyatsiya does not allow hit in salon polluted or badly smelling external air.
Press a key for inclusion or switching off of a mode of a retsirkulyatsiya. When the mode of a retsirkulyatsiya is included, in a key the yellow lamp burns.
The mode of a retsirkulyatsiya prevents penetration into salon of the polluted air, for example, at journey of the tunnel or stay in a stopper.
At low temperature of external air in a mode of a retsirkulyatsiya salon heating as instead of cold external air air from salon heats up increases.
At high temperature of external air in a mode of a retsirkulyatsiya salon cooling as instead of hot external air in the refrigeration unit more cool air from salon arrives improves.

ATTENTION
In a retsirkulyatsiya mode fresh air in salon does not arrive. At the switched-off refrigeration unit of glass can quickly mist over. Therefore do not include a retsirkulyatsiya mode for long time it it is dangerous.

Automatic mode of a retsirkulyatsiya
At automatic control of a retsirkulyatsiya mode inclusion and switching off of this mode is carried out by a sensor of quality of air.
Press a key for inclusion or switching off of an automatic mode of a retsirkulyatsiya. When the mode of a retsirkulyatsiya is included, in a key the yellow lamp burns.
At active automatic control of a retsirkulyatsiya mode this mode joins in the following cases:
When the sensor of quality of air identifies that air contains the increased quantity of harmful substances. As soon as the content of harmful substances in external air any more does not exceed admissible level, the mode of a retsirkulyatsiya is automatically disconnected, and in car salon external air again moves.
When automatic equipment of cleaning and обмыва a windshield is switched on. Through 20 about a mode of a retsirkulyatsiya it is switched off.
In a retsirkulyatsiya mode fresh air in salon does not arrive. Air is sucked in from salon, then heats up or cooled. Therefore in normal conditions a mode of a retsirkulyatsiya choose to prevent receipt in salon of harmful or unpleasantly smelling air.
As soon as the content of harmful substances in external air any more does not exceed admissible level, the mode of a retsirkulyatsiya is automatically disconnected, and in car salon external air again moves.

NOTE
The sensor of quality of air identifies only air with the increased content of harmful substances, however with a fetid odor he cannot identify air. If you wish, that unpleasantly smelling air did not get to salon, press a key
.


<