VW Touareg repair


- 1. Operation and car maintenance
   + General information
   + Keys and locks of doors, electric steklopodjemnikiya
   + Governing bodies and control devices
   + Management of a microclimate
   + Seats
   + safety Systems
   - Maintenance and driving
      Engine start-up
      Emergency vynimaniye of the ignition key
      Start-up of the petrol engine
      Start-up of the diesel engine
      Stop of the petrol engine
      Access without a key
      Automatic transmission
      Manual gear shifting – «Tiptronic» (selector)
      Kik-Down
      Mechanical transmission
      Pneumosuspension bracket
      Regulation of rigidity of a suspension bracket
      Parking brake
      Parking
      Cruise control (GRA)
      Design features of the off-road car
      Blocking of differentials
      Intellectual systems
      Amplifier of a wheel
      Catalytic converter
      Car additional equipment traction coupling device
      Works in a motor compartment
      Accumulator (ы)
      Wheels and tires
      Onboard tool, spare wheel, shinoremontny set, jack
      Wheel replacement
      Safety locks
      The help at engine start-up
      Car towage
   + Tables
+ 2. Engine
+ 3. Transmission
+ 4. Running gear
+ 5. Steering mechanism
+ 6. Brake system
+ 7. Onboard electric equipment
+ 8. Body
+ electric equipment Schemes



Volkswagen Touareg / Touareg repair>> Operation and car maintenance>> Maintenance and driving>> Safety locks
Replacement of safety locks
According to the table of safety locks establish, in what assembly block and at what number there is a faulty safety lock.

NOTE
Electrochains are protected by fuses. It is necessary to have some different spare safety locks in the car.

Switch off ignition and the idle electrodevice.
Uncover the assembly block.
Tweezers take out the corresponding safety lock from the assembly block.
If the safety lock fused (it is visible on the melted crossing point), replace it with the new safety lock calculated on the same current (the same color and with the same marking) and the same size.

NOTE
If the new safety lock through short time too fused, it is necessary to check the electrodevice in a specialized workshop.
If the safety lock calculated on a bigger current is put, emergence of refusals in other electrochains is possible.

Color marking of safety locks

The assembly block in the forward panel at the left
The assembly block under a cover.
The assembly block is closed by a cover.

Fig. 1.147 . Cover of the assembly block


To uncover – insert the flat end of a screw-driver into an opening in a cover 1 (fig. 1.147) .
Uncover in the arrow 2 direction.
In a covering the plastic tweezers for a vynimaniye of safety locks are placed.

Fig. 1.148 . Arrangement of safety locks


In the assembly block there is a place for two spare safety locks And (fig. 1.148) .

The assembly block in the forward panel on the right
The assembly block is closed by a cover.

Fig. 1.149 . Cover of the assembly block


To uncover – insert the flat end of a screw-driver into an opening in a cover 1 (fig. 1.149) .
Uncover in the arrow 2 direction.
In a covering the plastic tweezers for a vynimaniye of safety locks are placed.

Fig. 1.150 . Arrangement of safety locks


In the assembly block there is a place for two spare safety locks And (fig. 1.150) .


<